Our company undertook the entire electrical installation of the building, the design and installation of the automation system (EIB/KNX), the installation and programming of the Cooling – Heating Control System (SYNCO) and the Security System (Fully interconnected with the automation system)

Foundation grounding was performed as required by regulation.
Lightning protection
Installation of Shields – Piping
Wiring
Supply, installation, and connection of luminaires
Supply, installation, and connection of sockets, switches, supplies, machines
Supply, installation, and connection of Medium Voltage Substation
Supply, installation and connection of electrical panels
Supply, installation, and connection of electrical generating sets for H/Z.
Translated with DeepL.com (free version) The genset (generator) with automatic switching is automatically activated by a power supply interruption from the PPC or the detection of an unsuitable voltage due to a technical problem of the PPC. It requires no handling by the owner and is activated within 30 seconds. It protects the electrical network of the dwelling and supplies electricity to the H/Z panels.
Supply, install, and connect UPS uninterruptible power supply unit. The uninterruptible power supply unit supplies a normalized electrical load to all sensitive electronic devices, such as PCs, CDs, DVDs, Hi-Fis, TVs, etc., so that they are protected in the event of an overvoltage or sudden interruption and restoration of the electrical network.

Electrical installations in Sick currents (DATA, CCTV, Fire detection …)
Installation of Shafts – Piping
Wiring Data-Voice, CCTV, Fire Detection
Supply, installation, connection certification of Data-Voice, Rack outlets. The structured cabling network is configured so that at any time any data socket can be converted into a telephone or computer network. There are installed scaffolds (RACK) with all the necessary equipment for Internet and telephone distribution (Call Centre) in each room.
Installation and connection of cameras
Supply, installation and connection of fire detection system
Supply, installation and connection of an audio system
For lighting control and shutter/blinds control, EIB/KNX system with control by smart switches and Central control by touch screen was used. Much of the lighting is controlled by the Dali protocol, saving a significant amount on lighting management materials and enabling control of burnt-out lamps and faulty transformers. It is also possible for all luminaires in this protocol to have brightness control (Dimming).
The Cooling-Heating Control System (SYNCO) consists of controllers, which control all the cooling-heating devices and is fully interconnected with the EIB/KNX management system.

The security system provides coverage of the site in case of a possible intrusion, while it is interconnected with the EIB/KNX management system so that the existing devices can be used for the management of the building. Motion detectors, when the alarm is activated, detect for possible intrusion, while when it is deactivated they detect motion and activate/deactivate luminaires.