NISSAN – ANOR
Representative – Service
Eukarpia – Thessaloniki
Our company undertook the complete electrical installation of the building, including the installation of the camera systems, structured wiring network, power generator, uninterruptible power supply unit (UPS) and automation system EIV/KNX.
Electrical installations in High Voltage (PPC, HZ, UPS, Earthing) which were executed in accordance with the current Greek regulations of internal electrical installations of the state, the ELOT HD 384 standard, the PPC conditions, the rules of art and science and the instructions of the supervision
Foundation grounding was performed as required by regulation.
Lightning protection
Installation of Schars – Piping
Wiring
Supply, installation and connection of luminaires
Supply, installation, and connection of sockets, switches, supplies, machines
Supply, installation and connection of Medium Voltage Substation
Supply, installation and connection of electrical panels
Supply, installation, and connection of power generator pair of H / Z. The genset (generator) with automatic switching is automatically activated by a power supply interruption from the PPC or the detection of an unsuitable voltage due to a technical problem of the PPC. It requires no handling by the owner and is activated within 30 seconds. It protects the electrical network of the dwelling and supplies electricity to the E/Z panels.
Supply, installation, and connection of UPS uninterruptible power supply unit. The uninterruptible power supply unit supplies all sensitive electronic devices, such as PCs, CDs, DVDs, Hi-Fis, TVs, etc., with a normalized electrical load, so that they are protected in case of overvoltage or sudden interruption and restoration of the electrical network.
Electrical installations in Sick currents (DATA, CCTV, Fire detection …)
Installation of Schars – Piping
Data-Voice Cabling, CCTV, Fire Detection
Supply, installation, connection & certification of Data-Voice, Rack sockets. The structured cabling network is configured so that at any time any data socket can be converted into a telephone or computer network. There are installed scaffolding (RACK) with all the necessary equipment for Internet and telephone distribution (Call Centre) in each room.
Installation and connection of cameras
Supply, installation and connection of fire detection system
Supply, installation and connection of Audio System
Installation and Programming of the EIB/KNX Automation System (Control of lighting, ventilation, heating, with central control through visualization (SCADA))
The automation system controls all interior and exterior lighting, shutters/blinds, ventilation and heating/cooling of the building.
The control is done with system switches that are fully programmable, giving the possibility to select the operation of each button according to the owner’s needs. Each switch button has the ability to manage either roll/roll, On/Off lighting, Dim/Bright lighting, centralized lighting or roll functions.
The heating/cooling is controlled by thermostats of the system, giving the possibility to control any type of heating/cooling. Temperature control is carried out locally for each room or for the whole building, maximising energy savings with Comfort/Standby/Night/Frost mode.
The ventilation of the building on each level is timed to avoid unpleasant smells and optimize air quality, especially in basements where natural ventilation is not possible. CO (Carbon Monoxide) detectors have also been installed in all ventilated areas, so that if the safe limit is exceeded, priority is given regardless of the time schedule or manual command to operate the ventilation until the Alarm is deactivated.
For central control and supervision, a remote control system (Visualization) has been installed, giving the possibility to operate with scenarios, schedules, logics and sensors through a computer screen. On the computer screen we can see all the rooms of the building, with indications of the status of each luminaire, radiator, ventilation device, etc.
